Delphi CRD3.X

Delphi CRD3.X DPF / ADV Removal

NuoVolta provides a ready DPF / ADV Removal solution for the Delphi CRD3.X, used in Mercedes vehicles. The NuoVolta client recognises your original file, applies the solution and handles the related DTC codes.

No. 2 most requested solution for this ECU

147solution files for this solution

13solutions on this ECU

102DTC sets

Oct 2026last update

How it works

Applying DPF / ADV Removal to a Delphi CRD3.X file takes three steps.

Read the fileRead the original file from the Delphi CRD3.X with your tool.
Select the solutionOpen it in the NuoVolta client and select DPF / ADV Removal.
Write the resultSave the modified file and write it back to the ECU.

About DPF / ADV Removal

DPF (Diesel Particulate Filter) It is a filter added to the exhaust system in order to remove or reduce Particulate Matter that naturally occurs as a result of combustion in diesel engines. Increasing back pressure is absolutely undesirable, especially in terms of engine performance and fuel consumption. This situation, that is, the clogging level of the DPF, is constantly monitored by the DPF's inlet and outlet…

Most requested solutions

Ranking of the solutions NuoVolta users apply most often to this ECU.

Related DTC codes

Fault codes that are commonly linked to DPF / ADV Removal.

P0471 Exhaust Pressure Sensor Circuit Range/Performance P0544 Exhaust Gas Temperature (EGT) Sensor Circuit (Bank 1 Sensor 1) P2002 Particulate Filter Efficiency Below Threshold (Bank 1) P2031 Exhaust Gas Temperature (EGT) Sensor Circuit (Bank 1 Sensor 2) P2080 Exhaust Gas Temperature (EGT) Sensor Circuit Range/Performance (Bank 1 Sensor 1) P242F Diesel Particulate Filter (DPF) Restriction - Ash Accumulation P244A Diesel Particulate Filter (DPF) Differential Pressure Too Low (Bank 1) P244B Diesel Particulate Filter (DPF) Differential Pressure Too High (Bank 1)

DPF / ADV Removal on other ECUs

Delphi CRD2 Jeep and Mercedes Delphi CRD1 Mercedes Delphi DCM6.2V Audi, Citroen, DS and 7 more Delphi DCM7.1 Citroen, DS, Opel and 2 more Delphi DCM3.5 Citroen, DS, Ford and 2 more Delphi DCM3.7 Audi, Bobcat Construction, Chevrolet and 12 more Delphi DCM3.4 Citroen, Dacia, DS and 3 more Delphi DCM6.1 Ford

Frequently asked questions

Is a ready DPF / ADV Removal solution available for the Delphi CRD3.X?

Yes. NuoVolta has a ready DPF / ADV Removal solution for the Delphi CRD3.X with 147 solution files. It is applied with the NuoVolta client.

Which vehicles use the Delphi CRD3.X?

According to the NuoVolta database, the Delphi CRD3.X is used in Mercedes vehicles.

Are the related DTC codes handled?

The DPF / ADV Removal solution is applied together with the related DTC handling. If other codes remain, the DTC removal feature can disable them.

Diagnose and repair real faults first. Removing or disabling emission systems is only permitted where allowed by law, for example for off-road or motorsport use.

Ready to work with the Delphi CRD3.X?

Get the NuoVolta client and apply ready solutions to your ECU files.

See packages All solutions for the Delphi CRD3.X