[email protected] FAQ
Home
Features Modules Support List
News Pricing About Us Contact
EN IT
Bosch EDC17CP46

Bosch EDC17CP46 DPF / ADV Removal

NuoVolta provides a ready DPF / ADV Removal solution for the Bosch EDC17CP46, used in Mercedes vehicles. The NuoVolta client recognises your original file, applies the solution and handles the related DTC codes.

No. 3 most requested solution for this ECU
42solution files for this solution
13solutions on this ECU
40DTC sets
Apr 2026last update

How it works

Applying DPF / ADV Removal to a Bosch EDC17CP46 file takes three steps.

  1. Read the fileRead the original file from the Bosch EDC17CP46 with your tool.
  2. Select the solutionOpen it in the NuoVolta client and select DPF / ADV Removal.
  3. Write the resultSave the modified file and write it back to the ECU.

About DPF / ADV Removal

DPF (Diesel Particulate Filter) It is a filter added to the exhaust system in order to remove or reduce Particulate Matter that naturally occurs as a result of combustion in diesel engines. Increasing back pressure is absolutely undesirable, especially in terms of engine performance and fuel consumption. This situation, that is, the clogging level of the DPF, is constantly monitored by the DPF's inlet and outlet…

Read more about DPF / ADV Removal

Most requested solutions

Ranking of the solutions NuoVolta users apply most often to this ECU.

  1. 1 AdBlue / SCR / NOx Removal
  2. 2 EGR Removal
  3. 3 DPF / ADV Removal
  4. 4 Torque Monitoring Disable
  5. 5 Stage 1
  6. 6 Speed Limit / Vmax Removal
  7. 7 Readiness Calibration
  8. 8 Start & Stop Disable

Related DTC codes

Fault codes that are commonly linked to DPF / ADV Removal.

P0471 Exhaust Pressure Sensor Circuit Range/Performance P0544 Exhaust Gas Temperature (EGT) Sensor Circuit (Bank 1 Sensor 1) P2002 Particulate Filter Efficiency Below Threshold (Bank 1) P2031 Exhaust Gas Temperature (EGT) Sensor Circuit (Bank 1 Sensor 2) P2080 Exhaust Gas Temperature (EGT) Sensor Circuit Range/Performance (Bank 1 Sensor 1) P242F Diesel Particulate Filter (DPF) Restriction - Ash Accumulation P244A Diesel Particulate Filter (DPF) Differential Pressure Too Low (Bank 1) P244B Diesel Particulate Filter (DPF) Differential Pressure Too High (Bank 1)

Other solutions for the Bosch EDC17CP46

AdBlue / SCR / NOx Removal EGR Removal Torque Monitoring Disable Stage 1 Speed Limit / Vmax Removal Readiness Calibration Start & Stop Disable MAF Removal TVA Removal Flaps / Swirl Removal Lambda / O2 Removal Catalyst Removal

DPF / ADV Removal on other ECUs

Bosch EDC17C84 Dacia, Fiat, Mercedes and 3 more Bosch EDC17C42 Dacia, Mercedes, Nissan and 2 more Bosch MD1CS006 Dacia, Fiat, Mercedes and 2 more Bosch EDC17CP57 Mercedes Bosch MD1CP001 Mercedes Bosch EDC16C31-EDC16C32 Mercedes Bosch EDC16CP31 Chrysler, Dodge, Jeep and Mercedes Bosch EDC17C66 Mercedes

Frequently asked questions

Is a ready DPF / ADV Removal solution available for the Bosch EDC17CP46?

Yes. NuoVolta has a ready DPF / ADV Removal solution for the Bosch EDC17CP46 with 42 solution files. It is applied with the NuoVolta client.

Which vehicles use the Bosch EDC17CP46?

According to the NuoVolta database, the Bosch EDC17CP46 is used in Mercedes vehicles.

Are the related DTC codes handled?

The DPF / ADV Removal solution is applied together with the related DTC handling. If other codes remain, the DTC removal feature can disable them.

Diagnose and repair real faults first. Removing or disabling emission systems is only permitted where allowed by law, for example for off-road or motorsport use.

Ready to work with the Bosch EDC17CP46?

Get the NuoVolta client and apply ready solutions to your ECU files.

See packages All solutions for the Bosch EDC17CP46