Valeo VD46.1

Valeo VD46.1 MAF Removal

NuoVolta provides a ready MAF Removal solution for the Valeo VD46.1, used in Citroen and Peugeot vehicles. The NuoVolta client recognises your original file, applies the solution and handles the related DTC codes.

✓solution files for this solution

7solutions on this ECU

6DTC sets

Jul 2026last update

How it works

Applying MAF Removal to a Valeo VD46.1 file takes three steps.

Read the fileRead the original file from the Valeo VD46.1 with your tool.
Select the solutionOpen it in the NuoVolta client and select MAF Removal.
Write the resultSave the modified file and write it back to the ECU.

About MAF Removal

MAF (Mass Air Flow) The main function of the MAF sensor is to precisely measure the amount of air entering the engine. This information is critical to optimizing engine performance and controlling exhaust emissions. The ECU adjusts the fuel injection system and ignition timing using the data it receives from the MAF sensor. Thus, the engine operates efficiently and stably under different operating conditions (for…

Most requested solutions

Ranking of the solutions NuoVolta users apply most often to this ECU.

1 Flex E85

Related DTC codes

Fault codes that are commonly linked to MAF Removal.

P0101 Mass or Volume Air Flow (MAF) Circuit Range/Performance P0102 Mass or Volume Air Flow (MAF) Circuit Low Input P0103 Mass or Volume Air Flow (MAF) Circuit High Input

MAF Removal on other ECUs

Valeo VD56.1 Citroen, DS, Opel and Peugeot Valeo V46.11 Citroen and Peugeot Bosch MD1CS003 Citroen, DS, Opel and 2 more Delphi DCM6.2V Audi, Citroen, DS and 7 more Continental SID208 Alfa Romeo, Citroen, DS and 5 more Bosch EDC17C10 Citroen, DS, Fiat and 2 more Bosch EDC17C60 Citroen, DS, Opel and 2 more Delphi DCM7.1 Citroen, DS, Opel and 2 more

Frequently asked questions

Is a ready MAF Removal solution available for the Valeo VD46.1?

Yes. NuoVolta has a ready MAF Removal solution for the Valeo VD46.1. It is applied with the NuoVolta client.

Which vehicles use the Valeo VD46.1?

According to the NuoVolta database, the Valeo VD46.1 is used in Citroen and Peugeot vehicles.

Are the related DTC codes handled?

The MAF Removal solution is applied together with the related DTC handling. If other codes remain, the DTC removal feature can disable them.

Diagnose and repair real faults first. Removing or disabling emission systems is only permitted where allowed by law, for example for off-road or motorsport use.

Ready to work with the Valeo VD46.1?

Get the NuoVolta client and apply ready solutions to your ECU files.

See packages All solutions for the Valeo VD46.1