English
Italiano
When the engine is cold, it runs at high RPM and makes noise when it is first started. The reason for this was to quickly warm up the engine and get it ready to ride. However, in some circumstances this sound may be disturbing.
With this module, you can solve this problem and achieve a low RPM and quiet start.
Solution
Cold Start Sound Removal
NuoVolta provides a ready Cold Start Sound Removal solution for 22 ECUs, including Bosch MG1CS003, Bosch MED17.7.2 and Bosch MEVD17.2.9. Select your ECU below to see the details.
COLD START SOUND REMOVAL
FUNCTION OF COLD START SOUND REMOVAL
To quickly warm up the engine and make it ready for driving.
NUOVOLTA SOLUTION OF COLD START SOUND REMOVAL
- Apply the solution of the module related to NUOVOLTA.
- Write the mod file to the ECU.
- Take it for a test drive.
- If all the checks are OK, it means the problem is solved.
ECUs supported for Cold Start Sound Removal
Grouped by ECU manufacturer, most requested first.
Bosch
- Bosch MG1CS003
- Bosch MED17.7.2
- Bosch MEVD17.2.9
- Bosch MG1CS201
- Bosch MEVD17.2.5
- Bosch MED9.1.X
- Bosch MEVD17.2.3
- Bosch MEVD17.2.G
- Bosch MED17.1.X
- Bosch MG1CS002
- Bosch MEVD17.2.4
- Bosch MEVD17.2.6
- Bosch MEVD17.2.H
- Bosch MED17.1.62
- BOSCH MED17.8.3x-MED17.5.4
- Bosch MEVD17.2.8
- Bosch MG1CS024
- Bosch MG1CP007
- Bosch MED17.1.1
- Bosch MED9.6.1
- Bosch MG1CS031
Siemens
Diagnose and repair real faults first. Removing or disabling emission systems is only permitted where allowed by law, for example for off-road or motorsport use.
Ready to work with the Cold Start Sound Removal?
Get the NuoVolta client and apply ready solutions to your ECU files.