English
ItalianoBosch MED9.6.1 Cold Start Sound Removal
NuoVolta provides a ready Cold Start Sound Removal solution for the Bosch MED9.6.1, used in Chevrolet and Opel vehicles. The NuoVolta client recognises your original file, applies the solution and handles the related DTC codes.
How it works
Applying Cold Start Sound Removal to a Bosch MED9.6.1 file takes three steps.
- Read the fileRead the original file from the Bosch MED9.6.1 with your tool.
- Select the solutionOpen it in the NuoVolta client and select Cold Start Sound Removal.
- Write the resultSave the modified file and write it back to the ECU.
About Cold Start Sound Removal
COLD START SOUND REMOVAL When the engine is cold, it runs at high RPM and makes noise when it is first started. The reason for this was to quickly warm up the engine and get it ready to ride. However, in some circumstances this sound may be disturbing. With this module, you can solve this problem and achieve a low RPM and quiet start. FUNCTION OF COLD START SOUND REMOVAL To quickly warm up the engine and make it…
Read more about Cold Start Sound RemovalMost requested solutions
Ranking of the solutions NuoVolta users apply most often to this ECU.
Frequently asked questions
Is a ready Cold Start Sound Removal solution available for the Bosch MED9.6.1?
Yes. NuoVolta has a ready Cold Start Sound Removal solution for the Bosch MED9.6.1. It is applied with the NuoVolta client.
Which vehicles use the Bosch MED9.6.1?
According to the NuoVolta database, the Bosch MED9.6.1 is used in Chevrolet and Opel vehicles.
Are the related DTC codes handled?
The Cold Start Sound Removal solution is applied together with the related DTC handling. If other codes remain, the DTC removal feature can disable them.
Diagnose and repair real faults first. Removing or disabling emission systems is only permitted where allowed by law, for example for off-road or motorsport use.
Ready to work with the Bosch MED9.6.1?
Get the NuoVolta client and apply ready solutions to your ECU files.