English
ItalianoIt is a term used to determine whether vehicles' emission control systems are working correctly. This term is especially important in vehicle emissions testing and OBD (On-Board Diagnostics) systems.
Solution
Readiness Calibration
NuoVolta provides a ready Readiness Calibration solution for 83 ECUs, including Bosch MD1CS003, Bosch EDC17C50-C56 and Bosch EDC17C49. Select your ECU below to see the details.
READINESS CALIBRATION
FUNCTION OF READINESS CALIBRATION
- Emission Tests: Vehicle emission tests are tests performed to measure the harmful gases released by the vehicle into the atmosphere and to evaluate its compliance with emission standards. These tests are important to determine whether the vehicle's emission control systems are working properly.
- Readiness Monitors: The OBD system monitors the vehicle's emission control systems and has checklists called "readiness monitors" that indicate whether certain components (e.g., oxygen sensors, EVAP system, catalytic converters) are operating correctly. Each readiness monitor monitors the status of a relevant emission control system component.
- Readiness Calibration: Readiness calibration means that all or a specific readiness monitor in the vehicle's OBD system (for example, the EVAP system) is working correctly and is ready for emissions testing. This is necessary for the vehicle to undergo emissions testing and meet emissions standards.
- Readiness Condition: In order for a vehicle to enter emission tests, all readiness monitors in the OBD system must be in "complete" or "ready" status. If one or more readiness monitors are in the "incomplete" or "not ready" state, the vehicle cannot enter or pass emissions tests.
COMPONENTS OF READINESS CALIBRATION
- Readiness Monitors
PROBLEMS OF READINESS CALIBRATION
- Malfunction light coming on (Check Engine Light)
- Performance Decrease or Fuel Efficiency Decrease
- Emission Control Problems
NUOVOLTA SOLUTION OF READINESS CALIBRATION
- Apply the solution of the module related to NUOVOLTA.
- Write the mod file to the ECU.
- Check the dashboard and DTC logs. Take it for a test drive.
- If all the checks are OK, it means the problem is solved.
ECUs supported for Readiness Calibration
Grouped by ECU manufacturer, most requested first.
Bosch
- Bosch MD1CS003
- Bosch EDC17C50-C56
- Bosch EDC17C49
- Bosch MEDC17.9
- Bosch EDC17C10
- Bosch EDC17CV41
- Bosch EDC17C74
- Bosch EDC17C46
- Bosch EDC17C64
- Bosch EDC17C69
- Bosch MD1CS006
- Bosch EDC17CP45-CP49
- Bosch EDC17CP14
- Bosch EDC17CP57
- Bosch EDC17C41
- Bosch MD1CP001
- Bosch EDC17CP46
- Bosch EDC17C70
- Bosch MD1CS001
- Bosch EDC17CP20
- Bosch EDC16C31-EDC16C32
- Bosch EDC17CP02
- Bosch MD1CS069
- Bosch EDC17CP55
- Bosch EDC17C66
- Bosch EDC17C59
- Bosch MD1CS005
- Bosch EDC17CP10
- Bosch EDC17C54
- Bosch MD1CP004
- Bosch EDC17C08
- Bosch MD1CP002
- Bosch EDC17CP54
- Bosch MG1CS003
- Bosch EDC17CP44
- Bosch EDC17CP11
- Bosch MD1CE100
- Bosch EDC17C53
- Bosch EDC17C83
- Bosch MED17.7.2
- Bosch EDC17CP09
- Bosch EDC17C58
- Bosch MEVD17.2.9
- Bosch MG1CS201
- Bosch MEVD17.2.5
- Bosch MEVD17.2.3
- Bosch MEVD17.2.G
- Bosch MD1CS012
- Bosch EDC17CP74
- Bosch EDC17C81
- Bosch EDC17CP22
- Bosch EDC17CP24
- Bosch EDC17CP16
- Bosch MD1CS014
- Bosch EDC17CP18
- Bosch MG1CS002
- Bosch EDC17CP06
- Bosch MED17.1.27
- Bosch EDC17C43
- Bosch MEVD17.2.4
- Bosch MD1CP032
- Bosch MED17.7.7
- Bosch MG1CS008
- Bosch MEVD17.2.6
- Bosch MG1CS001
- Bosch MG1CP002
- Bosch MEVD17.2.H
- Bosch MG1CS111
- Bosch MD1CS018
- Bosch MD1CS089
- Bosch MD1CS027
- Bosch MED17.7.1
- Bosch MEVD17.2.8
- Bosch MD1CS025
- Bosch MG1CS049
- Bosch MG1CS163
- Bosch MD1CP006
- Bosch MD1CP017
- Bosch MD1CP062
- Bosch MG1CP007
- Bosch MG1CS047
- Bosch EDC17CP62
Continental
Diagnose and repair real faults first. Removing or disabling emission systems is only permitted where allowed by law, for example for off-road or motorsport use.
Ready to work with the Readiness Calibration?
Get the NuoVolta client and apply ready solutions to your ECU files.