NuoVolta Logo
SKODA - BOSCH MED17.5.2

IMMO REMOVAL [FLASH]

IMMO DUMP

It is the process of deactivating or removing the vehicles' immobilizer system. The immobilizer system is a security measure against vehicle theft and requires a signal exchange between the transponder chip in the vehicle key and the vehicle's immobilizer unit. If this signal is not verified, the vehicle cannot be started. Immo removal means bypassing or completely disabling this system. In cases where the vehicles need to be started, you can bypass this system and start the vehicle with the help of this process.

FUNCTION OF IMMO DUMP

1. Main Function:

The immobilizer system is a security mechanism that verifies the signal from the transponder chip in the vehicle key. Without this verification, the vehicle engine will be prevented from starting.

2. Working Principle:

  • When the vehicle key is inserted into the ignition switch, the transponder chip is read by the antenna ring.
  • This signal is sent to the immobilizer unit and verification is made.
  • If the signal is confirmed, the engine is allowed to start. Otherwise, the engine will be blocked and the vehicle will not start.

COMPONENTS OF IMMO

  • Transponder Chip
  • Immobilizer Unit
  • Antenna Ring

NUOVOLTA SOLUTION OF IMMO DUMP

  • DTC codes should be read and removed with a diagnostic tool.
  • Apply the solution of the module related to NUOVOLTA.
  • Write the mod file to the ECU.
  • Check the dashboard and DTC logs. Take it for a test drive.
  • If all the checks are OK, it means the problem is solved.

All Supported Modules